Carburizers are mainly used in iron and steel smelting. In the process of iron and steel smelting, a small amount of carbon has been burned, and there are oxygen, sulfur and phosphorus in the steel. After adding carburizers, on the one hand, the carbon content in the steel is increased, and at the same time The carbon in the agent reacts chemically with the oxygen, sulfur and phosphorus in the steel, which can exert the mechanical properties of the steel and is used as a reducing agent in the smelting process. High-quality recarburizers generally refer to graphitized recarburizers. Under high temperature conditions, the arrangement of carbon atoms is in the microscopic form of graphite, so it is called graphitization. Graphitization can reduce the content of impurities in the recarburizer, increase the carbon content of the recarburizer, and reduce the sulfur content.

Performance: It can replace traditional petroleum coke recarburizer and reduce the cost of steelmaking.

Features: Low ash, high calorific value of sulfur and phosphorus, high specific resistance, high mechanical strength, high chemical activity, high recovery rate of clean coal.

Quality and technical indicators: Ash content 90% Proportion > 1.6b/cm3 Sulfur-containing characteristics and processing process: The main raw material of the recarburizer produced by Shenyang Yujiu Electromechanical Equipment Co., Ltd. is selected from high-quality Ningxia Taixi low-ash, low-sulfur, and low-phosphorus ,

Cleaned coal is calcined at high temperature in a calciner, crushed and selected. During use, it has no smoke, no peculiar smell, stable carbon increase, and high recovery rate.

Performance: Fewer impurity signals, high carbon recovery rate, and obvious effect.

Application: used for electric furnace, converter, steelmaking and carburizing.